SvR-4100 USeR gUide
Speed
The Speed menu controls the speed type
(SPDL and SPDO) events.
Use the remote control to configure the
following options:
SPEED SOURCE:
Select
VEHICLE
to
obtain vehicle speed data from the
vehicle’s own speedometer, or
GPS
to
obtain this data from the GPS signal.
SPEED:
Select
MPH
to use miles per hour
or
KPH
to use kilometers per hour.
ALARM SETTING:
Select the following
options for
LOWSPEED
and
OVERSPEED
:
ENABLE:
Select
ON
to enable this SPEED
event. Select
OFF
to disable it.
THRESHOLD:
Use the number keys on
the remote control to enter the speed at
which the event is triggered.
ALARM:
Select
ON
to enable the ALM LED on the front of the SVR-4100 when the
THRESHOLD speed is reached and an event is triggered. This LED continues to flash
after an event is triggered until the configuration menus are accessed.
LOCK:
Select
ON
to lock the video of the recorded event when the THRESHOLD
speed is reached (not allowing it to be overwritten).
For more information about
connecting the SVR-4100 to a vehicle
speedometer, please contact Safety
Vision Technical Support.
Summary of Contents for SVR-4100
Page 1: ...Advanced Mobile Digital Video Recorder...
Page 55: ...53...
