Safety Vision SVR-4100, User Manual

Page: 22 / 56

SvR-4100 USeR gUide
Record Menu
The Record Menu contains parameters
that control how video is recorded.
options (Page 1)
The Options menu contains most of the
parameters that control how long and
when the SVR-4100 records video.
VIDEO TYPE
: Select NTSC or PAL.
RECORD MODE
: Select GENERAL to
began full-time recording automatically
when the SVR-4100 is powered on.
Select TIMER to begin recording as
defined in the Time Record menu. Select
EVENT to record only when an event is
triggered.
NORMAL RECORD RATE
: Select
NORMAL to record video at the quality
specified in the Record Setting menu at
all times. Select 1 FRAME to normally
record only 1 frame per second, until
an event is triggered, when recording
will automatically switch to the quality
specified in the Record Setting menu.
This option is useful to conserve storage
space.
ALARM PRE-REC TIME
: Select the amount
of time, from 1 to 60 minutes, to be recorded prior to triggering an event.
ALARM DURATION
: Select the amount of time, from 1 to 30 seconds, to be recorded
and marked as an event.
ALARM POST REC TIME
: Select the amount of time, from 30 to 1800 seconds, to be
recorded after triggering an event.
BUZZER TIME
: Select the duration of time (15, 30, 45, or 60 seconds) that an audible
buzzer sounds, or select ALWAYS to keep the buzzer on until the unit is turned off.
If an event is trigger while another
event is being recorded it will be
considered one event. The event will
end after the second trigger and the
time specified in the ALARM DURATION
field.