• Place Baby Unit more than 3 feet (0.9 m) away from your baby.
• To reduce audio feedback, position both Parent and Baby Unit far enough away
from each other to avoid interference. Turning the volume down will help.
• This monitor has indoor/outdoor range. During use of the monitor, if the sound
quality deteriorates, you may be reaching the limits of the monitor’s range.
If this happens, you will need to move Parent Unit closer to Baby Unit.
• Adjust the volume to a comfortable level for your environment.
• Day/Night Auto Viewing lets you see the baby in a darkened room. The video
display during this time is in black and white. For best view of your baby in a
dark room, increase brightness control until desired brightness is achieved.
• Baby Unit can also be wall mounted. (See page 14.)
For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
7
6
Quick Start Guide
Quick Start Guide
Plug in here
IMPORTANT:
Parent Unit will not operate unless rechargeable battery pack is
installed first.
To maximize battery life, charge a new rechargeable battery pack in Parent
Unit for 12+ hours before first use. You may operate Parent Unit with an AC
adapter while charging batteries.
Power On/Off
Button
Power On/Off
Button
1
Remove protective cling from Parent
Unit. Discard after you remove.
2
Connect AC adapter to the
back of Baby Unit.
4
Plug Parent Unit and plug Baby
Unit into wall to operate AC power.
3
Connect AC adapter to the
back of Parent Unit.
6
To turn Baby Unit on/off,
hold down Power On/Off Button.
5
Hold down Power On/Off Button
approximately 3 seconds to turn
Parent Unit on. To turn off Parent
Unit, hold down Power On/Off
Button approximately 3 seconds again.
Strangulation Hazard - Children have STRANGLED
in cords. Keep cords out of reach of children more
than 3 feet (0.9 m) away.
WARNING!
Plug in here