29
3. Place restraint on back seat of vehicle in
line with a top tether strap anchorage point.
4. Thread the vehicle seat belt through the
back of the seat through the
YELLOW
forward-facing belt path.
NOTE: If the car seatbelt is not long enough
to secure the child restraint,
DO NOT
USE SEAT BELT EXTENDERS.
NOTE: Never use position 4 for foward-facing.
NOTE: Before you start installation, adjust
the shoulder straps to fit your child.
Refer to
pages 24-25
.
NOTE: There is an option to install seat using seat belt with accessory
locking clip. Please see instructions provided with locking clip
for installation.
Forward-Facing Installation Using Seatbelt
1. Ensure
ISOGO
latches are secured into
stowage location.
2. Select the desired recline angle (
1, 2 or 3).
PUSH
PULL
SASH
LAP
CLICK
5. Place one hand on seat and firmly press
the child restraint down into the vehicle seat
and pull on seatbelt to remove slack.
6. Attach the top tether strap to the anchorage
point. Adjust until all the slack is removed.
Ensure Base of seat is not lifted.
SELECT
RECLINE
1, 2, 3