background image

31

PUSH

PULL

Rearward Facing Installation Using ISOGO

5.  Firmly push child restraint down into the 

vehicle seat whilst pulling on the 

ISOGO

 

straps.

6.  Alternate removing the slack from side to 

side until you get a firm fitment and achieve 
a majority 

GREEN

 indication. 

tip: Always check for 

GREEN

 at eye level.

Pull loose end parallel to the belt strap.

CHECK FOR GREEN ONCE CHILD IS SEATED 
AS THIS CAN CREATE ADDITIONAL SLACK IN 
SEAT. REMOVE EXCESS SLACK AS NEEDED.

DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.

WARNING

7.  Attach the top tether strap to the top 

anchorage point in the vehicle.

8.  Ensure there are no twists in the belt, and 

adjust until all slack is removed from top 
tether.

Do not attach the lower attachment connectors of two separate child 
restraints to the same ISOFIX low anchorages in your car.
Always attach the top tether strap to the child restraint upper 
anchorage in your car. Refer to your owner’s manual.
Child restraint lower attachment connectors and the ISOFIX low anchorages 
in your car are designed to withstand only those loads imposed by a 
correctly fitted child restraint. 

IMPORTANT

PULL

NEWBORN UP TO 

30 MONTHS, APPROX.

Summary of Contents for Summit ISO 30









































Reviews: