3.
C.
Basic U
se
26
27
NOTE:
Make sure harness
tightening strap is between
the harness strap and
plastic shell as shown.
Harness system must be reattached correctly.
Buckle’s metal retainer must be completely
through pad and shell.
Failure to follow these warnings can result in
serious injury or death.
Attach Harness Straps
to Splitter Plate
Fit loops on harness ends
completely on
the splitter
plate.
NOTE:
Make sure sewn
end of the harness strap
loop faces towards you.
5.
Thread harness straps
through each buckle tongue
(3)
. Thread the chest clip
(4)
.
Do the same to the other
harness end.
Do Not twist
harness.
Push harness ends through
slots in the seat back
(5)
.
3
4
5
Thread Harness Strap
Thread the harness down
through slot on left side of
plastic shell
(1)
and up
through slot on right side
(2)
.
NOTE:
Make sure sewn end
of the harness strap loop
faces the buckle before
starting.
Take both ends of the
harness and make them
even in length.
1
2
4.
4358-5258 onSide Air 6/4/10 9:49 AM Page 29
Meijer.com
