C-1
Remove and Install the Carrier to Base
To Remove Carrier from
Base
From the back of the
carrier, pull the base
release handle out and lift
the carrier out of the base.
To Attach Carrier to
Base
Align the notches in the
front of carrier with the
base lock bar. Push down
firmly to lock. You will hear
a “click” when it is locked.
Pull up on carrier to make
sure it is locked.
Failure to securely attach carrier to base can
result in serious injury or death.
C-2
Canopy Use and Installation
Thread Plastic Strip
Completely thread the
plastic strip in the channel
in front of the canopy.
1.
Attach Canopy to
Carrier
Fit back of canopy over
back of carrier. Snap
each plastic strip end to
each canopy post.
2.
To Adjust Canopy
Grasp the front of the
canopy and move front to
back to desired location.
3.
C.
Basic U
se
13
14
4358-5480 US S1 onBoard Air 10/1/10 10:27 AM Page 15
