continued on next page.
E
.Installing Rear-F
acing
E-4
Installing Base with Vehicle Belts
Store LATCH Belts
You
MUST
store the LATCH
system when using the
vehicle seat belts. See
section D-7.
1.
Do not use the LATCH system along with the
vehicle lap or lap/shoulder belt. Store LATCH
belts when using the vehicle belts.
Check the vehicle belt before each use. Use only
if the belt is tightened properly and securely.
Failure to follow these warnings can result in
serious injury or death.
Place Base in Vehicle
Rear-Facing
Center the base in the
chosen seating position.
2.
47
48
Belt lock off
MUST
be used when using this base.
B
Thread Vehicle Belt
Thread the vehicle lap or
lap/shoulder belt
combination through belt
path as shown.
With an ALR belt, pull the
belt all the way out before
threading the base.
5.
Lift Up Belt Lock Off
Plate “A”
B
4.
Unlock the Belt Lock
Lift up on the belt lock off
lock.
Remove the lock from the
plates.
Tip:
Push down on the
top cover to help make it
easier to open the lock.
3.
4358-5480 US S1 onBoard Air 10/1/10 10:27 AM Page 49
