continued on next page
Removing Seat Pad Set
49
50
Reclining Car Seat
This car seat has 3 positions.
Rear-Facing Mode
-
3
Reclined
or 2
Semi-reclined
For children
who cannot
sit up unassisted, the
Rear-
Facing Level Line
on the car seat
MUST
be parallel with
the ground using either
Position 3 or 2
.
For children
who can
sit up unassisted, you may make the
car seat more upright in
Position
2
.
Forward-Facing Mode
- 1
Upright
or 2
Semi-reclined*
Booster Seat Mode
- 1
Upright
or 2
Semi-reclined*
To Recline
: Pull the recline handle out and push the top of
the car seat back.
For More Upright
: Pull the recline handle out and pull the
top of the car seat forward.
*
When used in
Forward-
Facing Mode
or
Booster
Seat
Mode
, semi-reclined
Position
2
is
ONLY
to
be used
if necessary
to
install the car seat fl ush
against the vehicle seat
back.
The vehicle seat back
MUST
be upright.
1
Adjust Headrest
to Highest
Position
3
Locate Pad
Fabric Tab Slot
in Headrest
Pull the fabric tab
out of the slot in the
headrest as shown.
On Select
Models: Undo
Fasteners on
Headrest Pad &
Seat Pad
2
Gently Pull
Headrest Pad
Off Bottom
of Headrest
4
You do not need to
remove the harness
system to remove
the pad from the
car seat.
DO NOT
fully pull
the harness strap
out of the car seat.
Leave it threaded
in the hip harness
slots. If removed,
you will not be able
to rethread it.
To remove
accessories
, see
pages 3-4.
