Adjusting Headrest/Harness Height
7
6.
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
MUST
face out. You
MUST
use
the 1st or 2nd buckle slots when child
restraint is used rear facing. Any slot
can be used when forward facing.
1
2
3
7.
Reach Under the Seat
Between Base and Shell
and Through Recline
Handle
Pull metal retainer completely through
pad and shell.
8.
Check Buckle
Pull up on buckle to make sure it is
secured. The buckle
MUST
not pull
out.
WARNING:
Failure to place buckle’s metal retainer
completely through pad and shell can result in serious injury or
death.
WARNINGS:
Make sure the harness height is correct for
your child’s size.
Do not use this child restraint rear facing if the top of
your child’s head is above the top of the child restraint’s
headrest.
Do not use this child restraint forward facing if the
tops of your child’s ears are above the top of the child
restraint’s headrest in its highest position.
Failure to follow these steps can result in serious injury or death.
8
1.
Fully Loosen Harness
Straps
Push down on harness release lever
(under fl ap on front of seat pad) while
pulling out on harness straps as
shown.
2.
To Adjust Headrest/
Harness Height
Rotate headrest/harness adjustment
levers inward.
Move the headrest up or down to
the proper height for your child.
See
page 5 for fi t guidelines.
Release it into slot to lock. Make sure
it is securely locked into place.
5.
From Top of Seat,
Pull Buckle and Buckle
Cover Out of Shell and
Pad