
How Does Your Child Fit?
Changing Position of Buckle
6
5
2.
Fully Recline the Child
Restraint
Pull out on recline handle and push top
of child restraint back.
1.
Unbuckle Harness
Press in towards the
top
of the red
button.
Pull buckle tongues out.
3.
Locate Buckle’s Metal
Retainer
Reach under the seat between the
base and shell and through the recline
handle.
4.
Rotate Metal Retainer
and Push It Up Through
Shell and Pad
REAR FACING
FORWARD FACING
Start in the 1st slot and adjust outward as your child
grows. Buckle should be used in the slot closest to
your child. The buckle should not be underneath or
behind your child. Any slot can be used.
Always choose the shoulder harness slots that are
closest to your child’s shoulder height. Harness strap
MUST
be
at or slightly above
shoulders.
If the upper shoulder harness slots are below the
child’s shoulders with the headrest in the highest
position and the child weighs at least 18 kg (40 lb) and is at least 4
years old, you must convert the child restraint to a booster seat.
To change buckle position,
see pages 6-7.
To adjust headrest/harness height
,
see page 8.
To make adjustments for smaller infants,
see pages 9-11.
Use the guidelines below to determine if the buckle and harness strap
are in the right place for your child.
1
2
3
continued on next page
Start in the 1st slot and adjust outward as your child
grows. Buckle should be used in the slot closest to
your child. The buckle should be not underneath or
behind your child. 1st or 2nd slot
MUST
be used.
Always choose the shoulder harness slots that are
closest to your child’s shoulder height. Harness strap
MUST
be
at or slightly below
shoulders.
If the lower shoulder harness slots for smaller infants
are above the child’s shoulders with the headrest in
the lowest position,
do not
use this child restraint.
1
2