background image

73

74

Please complete the postage-paid registration card that came 
with your child restraint, and send it to us. Child restraints could 
be recalled for safety reasons. You must register this restraint to 
be reached in a recall. Send your name, address, e-mail address 
if available and the restraint’s model number and manufacturing 
date to:

Dorel Juvenile Group, Inc.
Consumer Care Department

PO Box 2609, Columbus, IN 47202-2609 
or call 1-800-544-1108 or register online at www.djgusa.com/
registration/carseat/us.
For recall information, call the U.S. Government’s Vehicle Safety 
Hotline at 1–888–327–4236 (TTY: 1–800–424–9153), or go to 
http://www.NHTSA.gov.

If you don’t have the card or if your ad-
dress changes, you will find the model 
number, manufacture date, and line code 
on the label located on side of shell.

Example of model number, manufacture date, and line code.

Registration and Safety Notices

 

Vehicle Seating Position

Never place a child rear-facing in a seating 
position with an active frontal air bag.
Check the vehicle owner’s manual for more 
information about air bag/child restraint use.
Use the child restraint only on vehicle seats 
that face forward. 
Do not use on seats that face the sides or 
rear of the vehicle. 
For vehicles without a back seat, refer to 
your vehicle owner’s manual.
Children are safer when properly restrained 
in rear seating positions than in the front 
seating positions.

According to accident statistics, children in rear seating 
positions are statistically safer, whether you have air bags, 
advanced air bags, or no air bags at all.

If you are not sure where to place the child restraint in your 
vehicle:

 consult your vehicle owner’s manual; contact Dorel 

Juvenile Group Consumer Care Department or visit your local 
Child Passenger Inspection Station. 
Go to http://www.safercar.gov/cpsApp/cps/index.htm to find your 
closest station. 

To avoid your child being seriously burned, take the 
following precautions:

1.

 Park in the shade or where sun does not directly hit the child 

restraint.

2. 

Cover the child restraint with a sheet or blanket when not in use.

3.

 Check for hot seat and buckles before placing child in child 

restraint.
To help protect your vehicle seat’s upholstery from damage, use a 
single layer towel underneath and behind child restraint.

Summary of Contents for Grow and Go Comfort Cool











































Reviews: