Place Car Seat Forward-
Facing in Back Seat
continued on next page
45
2
3
4
Finished Lower Anchor Belt
Routing
46
6
Loosely Attach Tether Hook
to Vehicle’s Tether Anchor
Check vehicle owner’s manual
for specific location.
5
Make Car Seat Flush
Against Vehicle Seat
Put the child restraint into
Position
1
.
Do not use any recline positions
except to make the child restraint
fl ush against the vehicle seat
back.
Vehicle seat back must be
upright.
NOTE: If your vehicle seat has
a headrest that interferes
with achieving a fl ush car
seat fi t,
check your vehicle
owner’s manual to see if it can
be removed, adjusted, or if there
are other possible seating
locations.
Adjuster
Route the Connector with
the Adjuster Closest to it
Through the Forward-
Facing Belt Path As Shown
Pull it across the seat. Then
thread it through the other belt
path opening.
Do not twist belt.
