18
Adjuster
UAS Belt Storage
Attachment
UAS Belt
Storage Attachment
UAS
Belt Parts
To Store UAS Belt
When using the vehicle belts to install,
using the
Booster Seat Mode
, or when
the car seat is not installed in a vehicle,
the UAS belt must be properly stored in its
storage location.
Thread the UAS belt through the
Forward-
Facing Belt Path
then attach the hooks to
the storage attachments as shown. Gently
tighten to remove slack.
To Remove UAS Belt from Vehicle’s
UAS Anchor Bars
Remove the tension from the belt by
pushing down on the side of the car seat
with the adjuster. Then press the adjuster’s
button to loosen the belt.
Remove the hook from the anchor by
squeezing the spring lever on the hook,
pushing the hook back into the seat bight,
and rotating the hook to the side. Then pull
the hook out of the vehicle seat bight.
17
Vehicle
Seat Bight
UAS Anchor Bars
For Use in
Rear-Facing Mode
or
Forward-Facing Mode
Your vehicle’s features may be considerably different
than those pictured here.
The lower anchors of
UAS
(Universal Anchorage System) is a universal
system for installing car seats without using vehicle seat belts.
The UAS belts can
only
be used in vehicles that have the UAS
anchor bars installed in designated seating positions. Most vehicles
manufactured after September 2002 are equipped with UAS anchor
bars.
Check your vehicle owner’s manual to see which seating positions
may be equipped with UAS anchor bars.
Do not use both the UAS belt and vehicle belt at the
same time.
UAS Use
To Remove UAS Belt from Storage
Attachment on Car Seat
Squeeze the spring lever on the hooks and remove the hooks from the
storage attachments.
UAS
Hooks