16
15
4
This car seat has 4 positions.
Rear-Facing Mode
- 4
Reclined
For children between 2.3-10 kg (5-22 lb),
the bottom level line on
the shell
must be
parallel with the ground.
For children 10-18 kg (22-40 lb) who can sit up unassisted,
rotate
the car seat between the 2 level lines.
Forward-Facing Mode
-
1
Upright
or 2 or 3
Semi-Reclined
Booster Seat Mode
-
1
Upright
or 2 or 3
Semi-Reclined
Reclining Car Seat
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
The sewn ends of the harness strap
loops
must
face towards you.
Do not
twist the harness strap or the
harness adjustment strap.
Make sure the same harness strap
loops are fitted
completely on
both
sides of the splitter plate.
From Back of Car Seat, Pull
Harness Straps Through Shell
The harness straps
must
be in the
shoulder harness slots
below
the
metal bar as shown.
Do not
twist the harness straps.
7
8
sewn
end
The harness system must be installed correctly. Do not use a
child restraint with damaged harness straps.
Check your child’s fit often.
To learn how to check harness tightness,
see pages 54-56.
To Recline
: Pull and hold the recline
handle out. Then push the top of the car
seat back.
For More Upright
: Pull and hold the
recline handle out. Then pull the top of
the car seat forward.
*
When used in
Forward-Facing Mode
or
Booster Seat Mode
,
the
semi-reclined
Position 2 and Position 3
is
only
to be used
if neces-
sary
to install the car seat fl ush against the vehicle seat back. The
vehicle seat back must be upright.
