The SABRE is available as an INLINE or a
RELAY device. Both products make it easy
to upgrade any existing access control
system with mobile access, without giving
up support for physical access cards. When
connected between a host reader and a
physical access control panel, the SABRE
enables mobile devices and wearables to
be used as a replacement or in-conjunction
with existing card technologies.
The SABRE INLINE and the SABRE RELAY
sensors contain onboard Wi-Fi which
permits two-way communication with the
Credential Manager for OTA remote
management and configuration.
The SABRE RELAY is an extension of the
INLINE device with additional access
controller management capabilities. The
RELAY is ideally suited for parking garages,
remote buildings and single door offices
where no existing cabling or reader
infrastructure exists. If you order the
SABRE INLINE it will come without the relay
section of the board.
Introduction
a) INLINE or RELAY Sensor
SABRE INLINE/RELAY Quick Start Guide
| 2
In the box
01
Product Overview
02
Included
b) Wiring
c) 7 1/8 in Solid and Stranded Wire Stripper
d) Insulation Displacement Connector,
Moisture Resistant, 300 V Max
e) Screwdriver
Not Included (Required)
a)
b)
c)
d)
e)
www.safetrust.com
