GRINDING
9
Always use eye protection when grinding and brazing.
CAUTION
Note, use only SAFETRACK´s grinding wheel specially made for
brazing, other type of wheels will leave a surface not suitable for
brazings. Keep the grinding wheel clean and free from oil etc.
NOTICE
Before brazing, the braze area must be cleaned of rust, corrosion, paint, pits, or other
contamination at the points where the brazing is going to be done and on an area close to the
brazing for placement of the grounding cable.
Cleaning is accomplished with a grinder to ensure clean, bare metal.
1. Grind the brazing and ground area until you have
an even and clean surface.
2. Attach the ground magnet on the same work piece
where the pinbrazing should be done. Try to attach
the magnet within 0,5 m from brazing area.
3. Move the grinder all time when grinding to get an
even surface.
Connect the grinder. If unit was supplied with battery power grinder, make sure that the batteries
are charged. Se manufactures instruction for the grinder on charging the grinder batteries.
Brazing
Ground
Brazing
Summary of Contents for ECONECT SAFE 94350
Page 22: ...22 NOTEPAD...
