PAGE
2
To be continued...
TE 426
B. Load Earpiece
Clean ear canal by cotton swab.
Load earpiece into ear canal horizontally for maximize signal
reception. Handle is better in down position for easy take out.
Put earpiece into canal deeply until its invisible. Please take
out earpiece and unload battery
w
hen you finish using it.
Ear
Canal
Eardrum
Load
earpiece
Connect to mobile phone
Plug the jack into mobile phone audio port.
Swith on the neckloop once connected.
Default plug is 3.5mm 4pins. 2.5mm 4pins and Nokia flat jacks are also available.
1) 3.5mm 4pins jack fit to PC/laptop/ipod/ipad/mp3/mp4 players and most of the smart phones with iOS, Android, Bada systems.
Also works with some Nokia mobile phones.
2) 2.5mm 4pins jack fit to most of Nokia mobile phones.
3) Nokia flat jack is for Nokia phone only.
**
If the jack does not work on your mobile phone, please contact us as you may require a different connection.
Even the jack is the same, the audio and microphone connections might be different.
2
Audio Sources
Mobile phone, mp3, ipad, etc
ON
OF
F
TE 26
Neckloop
Plug
into audio port
Wear the neckloop
You can wear the neckloop on neck as shown in the image
site down to drive sensitive earpieces including TE07/TE08P/TE09.
Power and volume control
Once connected to your mobile phone, move the Power Switch to the “ON” position. The indicator will change to a blue color
once power on.
In order to test the earpiece try playing some music on your mobile phone or mp3 player, you should now hear audio within your
spy earpiece (to use your earpiece see the earpiece manual). If you hear interference/noise its likely the volume is too high,
adjust the volume using the volume control.
When not using the neckloop for long periods of time, switch off the neckloop to save battery power.
Can also put neckloop in coat pocket or put on legs when you are
4
3
Volume
Controler
Turn on
Power Switch
Place neckloop
around the neck
ON
OFF
Amplified Phone Loop and Micro Headset Kit
