Safesight SC0301‐SC3102 Back up camera system
www.qualitymobilevideo.com
Page 3
3. Monitor wiring harness
This DC power connector plugs in to the monitor’s power input on one end, and splits into
two bare wires on the other
Note:
In
the
event
that
the
monitor
will
not
respond
please
make
sure
it
is
receiving
a
video
feed.
This
monitor
will
not
turn
on
without
receiving
a
video
signal
3.1 Identifying the bare wires
4. Backup Camera
The
camera has a single pigtail with two different inputs at the end of the cord, a black for
power and yellow for video. The camera also comes with infrared lights for nighttime use.
Note:
Infrared
lights
on
camera
are
not
visible
by
the
naked
eye
but
provide
a
black
and
white
picture
at
night.
4.1 Identifying the inputs
Bare Wire color
Connection
Red
Po 12 volts – connect this to an
electric terminal controlled by ignition
Black
Negative – 12 volts – connect this to vehicle’s
(metal) body/ clean ground
Input Color
Input Function
Yellow Input
Primary video input
Black DC Power
Connector
This is the DC power connector;
the center pin is positive
12volts. The outer shield is
negative 12 volts.
