Safesight SC0301‐SC3102 Back up camera system
www.qualitymobilevideo.com
Page 4
5. Backup Camera Wiring Harness
This DC power connector plugs in to the camera’s power input on one end, and splits into
two bare wires on the other
5.1 Identifying the bare wires
6. RCA Extension Cable
This single yellow RCA video cable is included with the camera and is designed to take the
video signal from the camera and display it on the monitor. (Usually 18‐25 ft long)
Note:
The
yellow
RCA
cable
may
have
two
red
power
wires
on
each
end.
They
do
not
need
to
be
connected
as
a
part
of
the
standard
installation
process.
These
red
leads
are
designed
to
be
used
as
alternative
means
of
powering
up
the
units.
6.1 Identifying the red power leads on RCA cable
Note:
These
red
leads
are
a
direct
pass
through
wire.
It
is
as
though
you
have
a
single
piece
of
wire
run
the
length
of
the
RCA
cable.
These
wires
can
be
used
to
send
power
to
the
camera
from
the
front
of
the
vehicle,
or
send
a
reverse
signal
from
the
light
to
the
front
of
the
vehicle
Bare Wire color
Connection
Red
Po 12 volts – connect this to an
electric terminal controlled by ignition
Black
Negative – 12 volts – connect this to vehicle’s
(metal) body/ clean ground
