10. Conformity
Safera Oy declares that Sense is in compli-
ance with the following EU directives and
standards. Full text of the EU declaration
of conformity is available at the following
internet address: www.safera.com/sup-
port/doc/sense
Directives: 2014/53/EU, 2015/863/EU,
2011/65/EU, 2012/19/EU
Stove guard performance, only for electric
hobs, only when used in conjunction with
the optional Power Control Unit (PCU): EN
50615:2015 (Category B)
Safety: IEC/EN 62368-1:2014 + AC:2015
+A11:2017
EMC: EN 301 489-1 V2.2.0, EN 301 489-17
V3.2.0
RF: EN 300 328 V2.1.1, EN 62311:2008
USA Only:
FCC ID (Airis AQ only): 2AT88-2000021194
This device complies with part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may
not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
This device complies with FCC RF ex-
posure limits and has been evaluated in
compliance with mobile exposure condi-
tions. The antenna must be installed and
operated with minimum distance of 20 cm
between the radiator and your body.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s author-
ity to operate the equipment.
Class B device notice
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are de-
signed to provide reasonable protection
against harmful interference in a residen-
tial installation. This equipment generates,
uses and can radiate radio frequency en-
ergy and, if not installed and used in ac-
cordance with the instructions, may cause
harmful interference to radio communica-
tions. However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or televi-
sion reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the follow-
ing measures: —Reorient or relocate the
receiving antenna. —Increase the separa-
tion between the equipment and receiver.
—Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected. —Consult the
dealer or an experienced radio/TV techni-
cian for help.
Mikko Reinikainen, CEO, Safera Oy
Espoo Finland 19.8.2019