1.
2.
3.
4.
Slide the Idler Pulley over the Bushing, followed by the Washer and Nut then tighten. (Fig. 13)
3.3 Installing the Override Pulley
Remove and
DISCARD
the 7/16 Nut and Bolt holding the back of the flipback arms to the frame. (Fig.10)
Slide the supplied Bolt back through the arm bracket. (Fig. 11)
Slide the Idler Bushing onto the Bolt with the larger end against the frame. (Fig. 12)
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Page 7
Summary of Contents for SAFER-BR-600
