17
SL3000 v.5.01 EN
Note! Please refer to the full
configuration setup in the
“Configurations codes table”
as these are merely examples.
If at any time you need to start over, use the factory
reset command *99*1#
Configuration
examples
- SafeLine
Autodialer
Units
Example 1. Storing of two different telephone numbers, both to
be answered as voice calls.
For test facility, see example 2.
Example 2. SLCC and 3 day test. (SLCC – SafeLine Call Centre)
1. Start configuration:
2. 1
st
phone number:
3. 2
nd
phone number:
4. Call type 1
st
number:
5. Call type 2
st
number:
6. Alarm button delay:
7. End configuration:
If at any time you need to start over, use the factory
reset command *99*1#
- Shown set for 3 seconds
- Shown set for 3 seconds
Lift ID code (each lift must have its own unique code)
(For P100 use telephone number of SLCC, for Caller ID set *31*4#
and telephone number of GSM modem)
(Only if using SLCC)
1. Start configuration:
2. Enter P100 ID code:
3. Set test alarm type:
4. Set number of days between test alarm:
5. LMS phone number:
6. Test alarm:
7. End configuration:
