background image

 

  

TECHNICAL FEATURES 

 

 

The MegaGuard WalkPlus is a portable measuring system that allows analysis 
of charge levels accumulated on the human body according to IEC 61340-4-5 
standard.

 

It's fully portable and doesn't require a PC for data acquisition because all data are 
measured and logged in the internal memory.

 

The operator can perform all necessary operations without any collaborator, and 
while he is walking the instrument is attached only with a single cable to a fixed 
position for the reference to the ground.

 

The graphs of the tests can be displayed on the graphic LCD for a quick evaluation.

 

Then they can be easily exported and analyzed on a PC for a professional 
documentation.

 

A program to manage the tests recorded in the instrument is included in the 
MegaGuard WalkPlus.

 

 

Instrument

 

Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±1050V

 

Resolution:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Volt

 

Accuracy:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5% o ±5V

 

Input resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

14 

 

 

Humidity: 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 95%RH

 

. . . . . . . . . . . . . . . . . . . . . . . . . (accuracy: ±2%RH to 25°C, 10%RH~90%RH)

 

Temperature: 

. . . . . . . . . . . . . . . . . . . . . . . . -20°C to +60°C (accuracy: ±1°C )

 

 

Display: . . . . . . . . . . . . . . . . . . . . . . . . . . . graphic LCD 128 x 64 pixel, 68x51mm

 

Power supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 alcaline batteries, LR6 1, 5V

 

Dimensions:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243x130x60mm (instrument)

 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø35x130mm (probe)

 

Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650g (instrument) - 250g (probe)

 

LOW BATTERY = 

     

Blinking 

Auto Shut-off after 10 minutes of inoperativity

 

 

Datalogger

 

In the internal memory of the instrument can be logged till to 10 graphs.

 

Sample rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200Hz

 

Max total graphs duration: . . . . . . . . . . . . . . . . . . . . . . . . . . . 2minutes and 30 sec 
Interface: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB

 

Summary of Contents for MegaGuard WalkPlus












Reviews: