4
Rest the Lower Spacer (E)
on the top of the skirting.
Remove the Marker Tool (H)
from the Spirit Level and mark
the drilling point by simulta-
neously passing it through
the slot in the Wooden Bar
and the Lower Spacer (if you
are making a wall vertical that
tilts away from the opening
or directly to the skirting,
this lower spacer may not be
needed).
Drill a hole at the mark (see
”
Before you start
” section)
filling the hole with a Wall
Plug (G) if appropriate.
Reassemble the Wooden Bar
plus Lower Spacer and loosely
screw it against the wall -
do
not tighten.
L
Step by step installation guide
Assemble the Wooden Bars (A
& B) by slotting the 2 halves
together. The Wood Block of
the Bottom Bar should slot
into the groove in the Top Bar.
Secure together with the
2 Barrel Nuts and Bolts (C),
using a screwdriver on either
side to tighten them firmly.
The back of the Wooden Bar is
the side where the Bolts are
not
flush with the surface.
Position the Top Spacer (I)
across the top of the Top
Bar, and attach it to the back
using the Small Screw (D). (If
you are making a wall vertical
that tilts towards the opening,
this Top Spacer may not be
needed).
UK
L
