11
3. Installation
3.1 Guidelines for Installation
For optimal detector performance and protection of the hazard, please consider the
guidelines for installation:
Spacing:
The number of flame detectors in the protected area is determined by
the size of the area, the Cone of Vision, obstructions, and sensitivity.
Aiming:
The flame detector should be pointed toward the center of the desired
area of protection. Point the detector pointed at a downward angle
to prevent dust and dirt build up if possible.
Sensitivity:
Determined by the size of the fire at the required distance and the type
of flammable materials.
Wiring:
Use only 12 to 24 AWG shielded wire for all power and networking
cable
Environment:
Avoid areas that are outside of the operating range of the detector and
areas that would be prone to false alarms.
3.2 Unpacking the Detector and Necessary Tools
Please inspect the external condition of the detector when unpacking the product. If
there is any damage on the detector please contact the manufacturer immediately.
Box contents:
Ÿ
SafeFlame IR3 detector
Ÿ
Mounting Bracket
Ÿ
Spare bolts (detailed below)
Button Screw (+)
Spare Part
Hexagon Wrench Bolt
Hexagon Wrench Bolt
M5x30
Size
M6x10
M6x35 (OEM)
4
Q’ty
2
4
For mounting the bracket
Description
Connecting bracket to the detector
Holding sensors to backplate
Necessary Tools for Installation:
Ÿ
Hexagon Wrench (Metric 5M)
Ÿ
Phillips Screwdriver
SafeFlame Installation and Operation Manual
(Publication#: MA-SF200OM)
