SAFE-RAIN F6324265, User Manual, Page: 3 / 25

Manual: LED RGB DRIVER F6324265
Property of SAFERAIN S.L.
www.saferain.com
Safe-Rain S.L info@saferain.com
Fabricantes de equipamiento para fuentes ornamentales y riego de jardines
3
1 General description.
F6324265 driver is designed to control the LEDs. Built-in DMX receiver allows to control 3 DMX
channels.
(R, G, B) directly with the DMX protocol. Wide range of power supply voltage and high current
carrying capacity outputs (6A) permit a control of large quantities of LEDs. What is more the
F6324265 has built-in fuses that can be replaced by the user by himself.
F6324265 can be either controlled by DMX, and act independently. In this case, the user is
offered a fully programmable scene and 18 pre-programmed sequences, which can also freely
change the playback speed and fluidity changes in steps. By using 16-bit resolution control of
each channel is completely smooth. Driver F6324265 can operate in different control modes: 2b
– brightness and one of the 256 colors define by the manufacturer, 3b – each color RGB can be
set separately, 3bd – each color RGB can be set separately and dimmer (dimming all outputs),
3bS – each color RGB can be set separately, frequency “strobo” and fill factor, HSL – responsible
for hue, saturation and lightness, dW – dynamic white (tunable white), control channels cold
and warm white, EFF – it is available on 7 DMX channels and control R, G, B, Mode, Speed, Fade
and Brightness.
The driver has a built-in tuning frequency signal system ("flicker free" technology), which makes
it particularly useful in applications for the television industry. The RGB LEDs often differ quite
substantially in parameters, this can cause problems in obtaining a white color (at full power
especially). Therefore F6324265 comes with a very useful function called "white balance".
Thanks to it you can choose color correction for each set of LEDs controlled by the device to
achieve at full power the color white.
2
Safety conditions
F6324265 is a device powered with safe voltage 7 – 24V; however, during its installation and
use the following rules must be strictly observed:
1. The device may only be connected to 7 – 24V DC with current-carrying capacity
compatible with technical data.