SAFE-RAIN F6324265, User Manual, Page: 14 / 25

14
12 Limiting the output power.
The white balance parameter, apart from its original functionality, can also be used to limiting
the output power of the driver. It works linearly and in a percentage way limits the output
power of a given channel.
For example, if the bLr parameter is set on 50, it means that by the DMX control and no signal
mode this value can not be exceeded. The control will only operate within the range 0 – 50% of
the output value for this channel.
For the activate this function, the bCn parameter must be set to “on”.
Available power limitation values:
bLr – the output power limitation value for the red channel (0 – 100)%
bLG – the output power limitation value for the green channel (0 – 100)%
bLb – the output power limitation value for the blue channel (0 – 100)%
bCn – turning on or turning oFF the limiting the power output
The menu diagram for Limiting the output power is analogous to that in chapter 11 White
balance (previous page).
13 Smooth.
The driver is equipped with a smooth option. Smooth feature allows for smooth changes in
lightness and colour. When it is set to On the transition between successive DMX values sent to
the lamp (e.g. corresponding to changes in lightness) are smooth with no visible twitches,
which prevents the common light “vibrations” effect. Two consecutive DMX values sent to the
DMX
Output
power
0
127
255
% 25
50 %