Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
Rear
Front
Mid
ASSEMBLY INSTRUCTIONS
OCM-3031 ASSEMBL
Y
INSTR
UCTIONS
CROSSBAR MOUNT BUILDS
1.1
1.2
Set two Crossbar to Channel Connectors onto the Tension
Brace Mounting Brackets as shown below, and install M8 Nut
Brackets and Hardware from HKT-0182. Do not fully tighten.
Note differing Bolt sizes below. Lock Washers and Flat Washers
are used with all Bolts as shown.
Install M8 Nut Brackets and Hardware from HKT-0183
into the Removable Crossbar Mounts as shown, but do
not fully tighten.
NOTE: Approximate Mount placements on
the Channels shown below for clarity.
NOTE: Channels in this Overview are shown for
reference only. Specific channels and configurations
are determined by Service Body size.
Leave Nut Brackets loose
Leave Nut Brackets loose
M8 x 50MM
Lock Washer
Lock Washer
Flat Washer
Flat Washer
M8 x 30MM
M8 x 20MM
