manualshive.com logo in svg

Safe Fleet PRIME DESIGN ASH-8033, Assembly Instructions Manual, Page: 2 / 8

Share
Download
Safe Fleet PRIME DESIGN ASH-8033 Assembly Instructions Manual Download Page 2

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability 
(the “Prime Design Limited Warranty”). 

▪

 TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

2

ASH-8033 P

A

CKA

GING CONTENTS

CONTENTS OVERVIEW

ASH-8033 Strobe/Go-Light Holder, Universal

Note: Rack model and Conduit 

Carriers are shown in this Manual 

for illustrative purposes only, and 

are not included with this Light 

Holder assembly. 

M8 x 30MM (2X)

M8 x 70MM (2X)

M8 x 25 MM (2X)

M8 Lock Nut (4X)

Lock Washer (2X)

" Flat Washer (4X)

GoLight Mount (1X)

Nut Bracket (2X) Z Post Clamp (1X)

Mounting Clamp (1X)

Anti-Seize (1X)

Summary of Contents for PRIME DESIGN ASH-8033









Reviews:

No comments