© Safe Fleet | September 2019 | All rights reserved
SSV9 Installation and Setup Guide
30
R2
System Configuration
4 .
Set detection region(s) for the channel:
i . Press the
Set
button.
A grid displays on a green screen, where you can select detection regions by touching squares on the grid.
ii .
After making your selection (one or multiple squares), press the [X] button at the right bottom corner of the screen
5 .
Sensitivity: select a detection sensitivity level.
6 .
Use the check boxes to select channel(s) for recording when motion is detected.
7 .
Select periods of time.
8 .
Select the alarm output.
As with alarms, both options can be selected. I/O output displays a yellow “motion” icon on the screen.
