© Safe Fleet | September 2019 | All rights reserved
SSV9 Installation and Setup Guide
27
R2
System Configuration
The
Camera Settings
menu enables you to define, on a per-trigger basis, which camera channels are shown, along
with the option to display a distance grid on the image.
After you select a trigger from the Trigger menu, you can apply properties for that trigger’s display, as described in the
following steps.
2 .
Channels to show: use the check boxes to enable and disable display for the channels.
3 .
Show distance grid: use the check boxes to determine whether a distance grid should be overlaid on the channel’s
display.
4 .
Off delay:
•
Use the drop down menu to choose a delay (in seconds) before turning off the channel displays.
•
This function can also be used to keep the camera image displayed on the monitor during the turn signal cycle.
i .
Use the drop-down menu to choose the appropriate channel.
ii .
Then choose the amount of time (0 to 5 seconds) that you want the off delay to be activate and allow the camera
image to be displayed on the monitor during the turn signal cycle.
