Safe Fleet DH4 Installation Manual Download Page 6

Page: 6 / 50

DH4 Installation Guide

p. 6

DH4 Installation

DH4 Installation

Installation Best Practices

Before you begin, keep in mind that it is your responsibility to avoid damaging safety or electrical systems. If you are not

confident in your ability to perform the procedures in this guide, please contact Technical Support at 1.844.899.7366 or

[email protected] for assistance.

The following table outlines the physical and environmental requirements for installing a DH4 DVR:

VENTILATION

Install the DVR away from any sort of heat outlet, heater, or AC blower. Do not operate the DVR

in a closed -in area, or restrict ventilation in any way. The DVR requires air circulation to maintain

optimum operation temperature and provide best performance.

Do not expose the DVR to

moisture!

SURFACE

Do not mount the DVR to a plastic panel or other surface that is subject to constant vibration.

ORIENTATION

Mount the DVR in either a horizontal or vertical orientation, or hung right side up,

but NOT

upside down

CLEARANCE

Allow sufficient clearance of at least 6 inches in front of the DVR and 2 inches to each side for

removal of the security front cover and easy access to the hard drive and USB ports. Allow

sufficient clearance behind the DVR for camera cables, mounting cables, Ethernet cables, and

power cables.

MOUNTING CABLES

The radius for the mounting cables will be dictated by the cable cover. The rear-most surface

of the cable cover will be about 3 inches from the back of the DVR to allow camera cables to

bend over each other.

ETHERNET CABLES

Avoid right angle bends in the Ethernet cables.

POWER CABLES

Provide enough slack on the power cable to prevent any force from being exerted on the

connectors. A single 4-inch diameter loop is sufficient.



WARNING

It is your responsibility to avoid damaging safety or electrical systems. Ensure you read and understand the DH4 DVR

Installation Requirements.

If you are not confident in your ability to perform the procedures in this tutorial, please contact Technical Support at

1.844.899.7366 or [email protected].

Summary of Contents for DH4

















































Search results

Summary of Contents for DH4

Reviews:

Brands by name

Popular brands

Safe Fleet DH4, Installation Manual

Search results

Summary of Contents for DH4

Reviews:

Brands by name

Popular brands