background image

© Safe Fleet | 2020 | All rights reserved | Part #: 700-1234 R1

DH4 Installation Guide

p. 11

DH4 Operation

DH4 Operation

DVR Front Panel Features

1.  DVR Drive lock requires the DVR drive key to unlock 

and remove the DVR drive.

2.  DVR Drive for playback, remove the drive and use the 

HDD Dock connected to a PC.

3.  LAN Port RJ45 Ethernet connector for a laptop, 

Smart Reach Mobile wireless equipment, or other 

accessories.

4.  Status Lights:

•  POWER illuminates when the DVR is powered on.

• 

flashes quickly when the DVR cannot power 

up due to temperature limitations

• 

flashes slowly when the DVR cannot power 

up due to voltage limitations.

•  HDD illuminates when the DVR is accessing the 

drive.

•  ERR illuminates solid red when one of the 

following faults occurs:

•  video loss
•  HDD unlocked
•  fan error
•  PoE overload

5.  Mouse Port connection for USB mouse (shown with 

slot dust cover).

6.  USB Port (shown with slot dust cover) supports USB 

devices used to:

•  copy video and audio information 
•  export video clips
• 

update DVR firmware

• 

import/export configuration data and archives

7.  AUDIO-RCA jack for audio output. 

8.  VIDEO RCA jack for video output (playback and live 

viewing with a portable monitor).

9.  SD Card Slot Cover- SD card for recording low 

resolution ("R2") backup video stream.

10. 

TEMP POWER. Powers on the DVR for five minutes if 

held for more than 5 seconds. Powers down the DVR 

if held for more than 5 seconds in temporary power 

mode or in shutdown sequence with ignition off.

1

2

3

4

5

6

7

8

9

10

Summary of Contents for DH4



















































Reviews: