Defender 100LDS™ –
Product Manual Version 1.4
5
Safe Barriers Pte Ltd
1.
Introduction
1.1.
System Overview
The
Defender 100LDS™
is a steel safety barrier that is made of hot dip galvanised steel and is
intended for use as a temporary barrier system for the protection of workers and motorists
within and through a work zone. The barrier is anchored to the road surface every 9.15 metres.
The secure connection of the
Defender 100LDS™
units is made by interlocking the Male and
Female end units together with the insertion of a connection pin to secure each unit in place.
The cross section of the unit is detailed within Figure 1.1 below and consists of a 680mm width
base with an 800mm height which results in a centre of gravity at 342mm. Each single unit is
3959mm in length, with an effective barrier length of 3900mm and weighs 303kg, or 77.7kg
per lineal meter.
Figure 1.1:
Defender 100LDS™
Cross Section
The
Defender 100LDS™
has undergone the crash tests required by MASH 16 and
AS/NZS3845:2015 for safety barriers, as well as the mandatory test for transitions from the
safety barrier to the end terminal. A more detailed description and crash test results are
detailed within Section 2.3. The system can be installed in one (1) configuration: