Step 1
Step 2
Step 3
Step 5
Step 6
Now insert the small end of Cylinder Column (5) into
Control Mechanism (4) and carefully press downward
with moderate force until it is fully seated.
Assemble the Seat(3) to the Back(2)
together,using three Short Screws(8) and
three Washers(10).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS
ARE FULLY TIGHTENED BEFORE USING
CHAIR
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Step 4
PREPARATION
Insert five Casters (7) into Star Base (6),
push hard until you feel or hear the
Caster(7) snap into place. Insert the
LARGE end of Cylinder Column (5) into
the Star Base (6) and carefully press
downward with moderate force until it is
fully seated.
Attach Control Mechanism (4) to
Seat Assembly (3) with the arrow
towards the front of the chair, using
four Washers (10) and four Short
Screws(8).
Connect the Headrest(1) to Back(2) by
using two Medium Screws(9).
