C
D
2
G
H
1
2
STEP9
: Part of Metal Runner must be installed to Center Board 2 Le� (G)
and Center Board 2 Right (H) on both sides.
Start with Center Board 2 Le� (G). Secure part of the
metal runner (HW RM35A) into posi�on as the above image,
using screw M6x10,5mm (HW19), then flip the board to access
the opposite surface, con�nue to secure part of metal runner (HW RM35A)
on the opposite surface using screw M6x10,5mm (HW19).
Repeat this step for Center Board 2 Right (H).
STEP10
: A�ach Center Board Le� (E) and Center Board Right (F)
into Fixed Shelf ( I ), secure with Screw M7x50 (HW7) using Allen Key (HW8)
STEP11
: Con�nue by a�aching Side Board Le� (C) and Side Board Right (D)
into the assembled components from step 10. Insert Camlock Big (HW2) and
�ghten it using screwdriver.
STEP12
: A�ach Center Board 2 Le� (G) and Center Board 2 Right (H)
into the assembled component from step 11.
Insert Cambolt (HW1), Camlock Big (HW2) and �ghten it using screwdriver.
E
F
I
7
8
G
G
H
H
19
19
19
19
5
5
RM35A
RM35A
RM35A
RM35A
