STEP13
: Bring the Top Board (A) into assembled component.
Secure with Camlock Big (HW2) and �ghten it using screwdriver.
Put the Screw Cup Short over the �ghtened camlock.
STEP15
: Insert Cambolt (HW1) as shown in the figure,
�ghtened using screwdriver.
STEP16
: Place An� Deflec�on Metal Bar (HW US11) , secure with
screw M6x10,5, �ghten using screwdriver.
STEP14
: Bring the assembled components from step 13 upside down
with the Top Board on the floor. Insert Back Board (V) into posi�on.
Then put Bo�om Board , secure with Screw M7x50 (HW7) ,
�ghten screws using Allen Key (HW8).
A
2
20
20
16
16
20
B
V
7
Laminated
8
B
1
B
19
US11
