4
XL-AS20015BM-en-US Rev E · 2022-10-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Figure 1
Tire Pilot Plus Identification
Figure 2
Figure 4
Figure 3
2. Tire Pilot Plus Identification
In order to identify a parts list for your system the following
information is required:
Number of axles
Tire pressure setting
Single Tires or Dual Tires
Suspension Serial number(s)
Tapered or Parallel Spindle
2.1 Sliding Suspension Model Identification
The sliding suspension serial tag is located on the rear
crossmember
(Figure 2)
.
NOTE:
This manual applies to all suspension models.
However, determine your specific model number,
write that information below and refer to it
when obtaining information or replacement parts
(Figure 3)
.
2.2 Fixed Frame Model Identification
The fixed frame suspension serial tag is located on the frame
bracket
(Figure 4)
.
NOTE:
This manual applies to all suspension models.
However, determine your specific model number,
write that information below and refer to it
when obtaining information or replacement parts
(Figure 3)
.
The Tire Pilot Plus Electronic Regulator Assembly also has a
serial number tag on the control box, and a part number tag
located on the outside as illustrated in
Figure 1
.
TAG LOCATED ON
REAR CROSSMEMBER
H-SHAPED CROSS
SECTION
TAG LOCATED ON
THE FRAME BRACKET
SERIAL TAG
