15
D) Installation instructions
Check the brake calliper for free and easy movement.
Back off the tappets on the adjuster until the boots are visible.
Perform a visual inspection of the boots and all seals.
Screw in the tappets again completely.
Replacing the brake disc
Unscrew bolts M 18 x 1.5 from the wheel flange and remove the
wheel flange.
Note:
Bolts must not be oiled!
(Observe tightening torques)
Press the brake disc off the hub unit with 3 hexagon head bolts
M 12 x 30.
Clean contact surfaces before assembly.
Caution!
Seal on axle nut must not be damaged as this would invalidate all
warranty claims.
