B) Maintenance instructions
Brake pad check
Caution!
Observe the wear limits of the brake pads.
Check the thickness of the brake pads for compliance with the legal
requirements at regular intervals, but at least every three months,
depending on the operation of the vehicle.
A = Minimum residual lining thickness 2 mm
B = Total lining thickness of new pads 21 mm
When the residual lining thickness is A
≤
2 mm, replace the brake
pads.
Wear indicators
At the point on the brake calliper (59/60) opposite the fixed sleeve
(70.2), the brake pad thickness can be measured without removing
the wheels.
When the end of the guide sleeve (70.3) is level with the fixed slee-
ve (70.2), the brake pad thickness has to be checked with the wheels
removed.
Replace the brake pads, if necessary.
C = Condition with new brake pads.
D = Brake pad and brake disc inspection necessary with wheels
removed.
A
B
10
C
59/60
70.2
70.3
D
59/60
70.2
70.3
