5
XL-AS20016BM-en-US Rev A · 2015-05-28 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Decal Requirements
Figure 4
Figure 5
ALIGNMENT BOLT IS ON THE FRONT OF THE ROADSIDE FRAME BRACKET:
XL-AR372-01
STEP 1.
Before aligning axle, pull trailer forward in a straight line for a sufficient distance to insure there are no binds
in the suspension and then lock the brakes so the slider lock pins rest against the rear of the body rail holes.
STEP 2.
Check to verify trailer is empty and emergency brakes are
NOT
engaged.
STEP 3.
Rotate bolt
CLOCKWISE
to move axle forward (A arrows);
COUNTERCLOCKWISE
to move axle rearward (B arrows).
A = axle forward
B = axle rearward
ALIGNMENT BOLT HEAD
NOTE:
1/2 turn of
free play in either
direction (A or B)
is acceptable.
SWINGALIGN
™
NON-WELDED AXLE ALIGNMENT PROCEDURES
www.safholland.us
Copyright © 2011
#
SAF-HOLLAND, Inc.
XL-AR418-01
Torques are with clean, lubricated threads.
Always apply torque to nut, if possible
.
REQUIRED RE-TORQUING SCHEDULE:
miles.
maintenance.
relining
.
Fastener Size
Pivot Connection
Shock
Air Spring
SwingAlign
1- 1/8"
3/4"
1/2"
3/4"
1/2"
Torque
ft.-lbs.
-#
550 - 600
(746- 81
140 - 175
(190-
30 - 40
(41-
40 - 45
(54 -
50 - 60
(68 -
CBX SLIDER AIR SUSPENSION TORQUE SPECIFICATIONS
www.safholland.us
Copyright © 2014
-
SAF-HOLLAND
®
, Inc.
Figure 6
Figure 7
CAUTION
Failure to check for proper PosiLok™ position
could result in vehicle / suspension damage.
XL-AR437
WHEN TRAILER PARKED:
Check that the
PosiLok™ is in
the
DOWN
position.
PosiLok™
DOWN
BEFORE MOVING TRAILER:
Check that the
PosiLok™ is in
the
UP
position.
PosiLok™
UP
www.safholland.us
Copyright © 2011
#
SAF-HOLLAND, Inc.
CAUTION
Suspension system must fully air up before moving trailer. Failure to wait before moving trailer
could result in suspension and/or slider damage.
XL-AR439
www.safholland.us
Copyright © 2011
#
SAF-HOLLAND, Inc.
