S
AEY
INIGO/ILDRI
08112013
– v02
48
ENGLISH
7
U
SER INSTRUCTIONS
Fuel
Clean, dry firewood
Only cleaved firewood with a moisture content of ≤20% is suited for use in this appliance. Hard types of wood such as
oak, beech, as hand wood from fruit trees are preferred. These burn more slowly and produce more heat. are
preferred. You may also burn wood briquettes. It’s also important to use the correct length and an appropriate
amount of firewood.
Damp wood results in incomplete combustion, making it pollutant. It’s also difficult to light, extinguishes easily and give
off significantly less heat compared to dry wood. Finally, soot can be deposited on the glass, in the appliance or the
chimney.
Safe and natural firing
It’s strongly recommended to start the fire with biomass firelighters or chopped wood, not with newspaper. Liquid
fuels are prohibited!
Use only environmentally friendly fuels
Under no circumstances burn impregnated wood, plywood, pallet wood, chipboard, waste or newspaper in your
appliance. This is quite rightly prohibited by the environmental legislation. During the combustion of these fuels high
concentrations of harmful substances are released.
The combustion of above-mentioned fuels is also harmful for the appliance and chimney. The temperature in the
appliance can rise too high with the risk of a chimney fire.
First use
When using for the first time, kindle a small quantity of fuel and gradually open the air supply. This way you avoid
cracks in the firebricks and the paint of the appliance can dry. The smoke released during this phase is not toxic,
although it is advised to ventilate the room properly. It is not indicated to touch the paint during this period.
Summary of Contents for ILDRI 60
Page 54: ......