18
4
5
Select one of four cleaning methods previously
recommended.
a. When the heater is needed, press the TEMP button to
select one of five preset temperature settings.
Press the TC button, it will flash
, indicating that
the heater is on. The LED display shows the actual
temperature of water. When the water reaches the set
temperature, it turns off
, indicating that the heater
is off.
To ensure safety, the unit is designed with double
protection.
The heater will automatically shut down if running for
50 minutes.
When cleaning is complete, disconnect the power cord,
open the cover and remove the basket and objects.
Connect the hose to the drain pipe, as previously
recommended.
- Open the drain valve to drain the dirty water.
- Clean and dry the tank.
- Close the drain valve.
b. The degassing function can be used. Press the TIME button to set the clock to 10 minutes, and
then press the function button, it will light up
. Press the On/Off button to start degassing. The
device switches to the normal cleaning mode after 2 minutes.
c. When the "smoke" of the waste is no longer visible, the cleanup is complete. If further cleaning
is required, set the clock again and repeat the above steps.
EQUIPMENT OPERATION
