13
5. Normal cleaning status
- Illuminated, normal cleaning is in progress.
6. Heater status
Press the TC button, it flashes
, indicating that the heater is on. Press the TC button again, it
turns off
, indicating that the heater is off.
7. Water temperature display
Displays actual water temperature in the tank.
8.
Operating time display.
It counts down, after the work is started.
9. Water temperature display (configuration).
Press the "Temp" button to select one of five temperature settings.
10. TIME button (configuration). Clock quick setup button.
Press the TIME button, the LED displays
. Press the button again to set the clock. Each
time pressed, the button adds 5 minutes.
11. Button - Clock decrease button
Each time pressed, reduces the clock in 1 minute.
12. CT Button – Heater button
Press the TC button, when flashing
, i, indicates that the heater is on. To cancel the heat, press
TC again,
it turns off indicating that the heater is off.
13. TEMP button - Temperature adjustment button
5 Temperature settings can be selected. The standard temperature is 40°C. Press the "TEMP" button
to select the temperature in the following sequence:
When the water temperature reaches 60°C, the system turns off automatically.
Attention
EQUIPMENT OPERATION
