SAES SIP POWER, User Manual, Page: 51 / 62

USER MANUAL - SIP POWER ION PUMP CONTROLLER
M.HIST.0109.23 Rev.1 Page 51 of 62
•
Bit 1 – SW2 Output state
This flag shows output status of SW2 switch.
•
Bit 0 – SW1 Output state
This flag shows output status of SW1 switch.

Bit 280:799 – Reserved for future use
800 16bits 815 816 32bits 847 848 8bits 855 856 32bits 887 888 32bits 919
VOUT_SETPOINT VOUT_RAMP_INTV SW_MODE SW1_THR SW2_THR_MIN
920 32bits 951 952 32bits 983 984 32bits 1015 1016 32bits 1047 1048 16bits 1063
SW2_THR_MAX SW3_THR_MIN SW3_THR_MAX KEEPALIVE CONV_RATE
1064 8bits 1071 1072 528bits 1599
MODBUS_ID RESERVED
Fields description is the same of Section 10.1 with a offset of 800 bits. Bits between 1072 and
1599 are reserved for future use.
1600 32bits 1631 1632 32bits 1663 1664 8bits 1671 1672 8bits 1679 1680 8bits 1687
IP_ADDR IP_NETMASK MAC_ADDR_B0 MAC_ADDR_B1 MAC_ADDR_B2
1688 8bits 1695 1696 8bits 1703 1704 8bits 1711 1712 688bits 2399
MAC_ADDR_B3 MAC_ADDR_B4 MAC_ADDR_B5 RESERVED

Bit 1600:1631 – New IP address
This field contains the new Sip Power IP address.

Bit 1632:1663 – New IP network mask
This field contains the new Sip Power IP network mask.

Bit 1664:1671 – MAC address byte 0

Bit 1672:1679 – MAC address byte 1

Bit 1680:1687 – MAC address byte 2

Bit 1688:1695 – MAC address byte 3

Bit 1696:1703 – MAC address byte 4

Bit 1704:1711 – MAC address byte 5

Bit 1712:2399 – Reserved for future use