Do not install the instrument near power equipment
(motors, inverters, contactors, etc.) or near equipment that
do not comply with CE standards for electromagnetic com-
patibility.
The antenna placement is crucial for maximum performance, both
for the transmitter and for the receiver. Here are some things in this
regard:
Avoid installing the unit transmitters and receivers at a distance ex-
ceeding 50 meters.
If it is possible do not place the antenna in close proximity to people or things moving.
In addition:
INSTRUMENT INSTALLATION
The following procedures must be performed by qualified
personnel.
All connection must be performed with instrument turned
off.
The instrument is secured by 2 screws inserted into holes (diameter 6 mm)
indicated by the arrows in the figure. Distance between holes 108 x 45 mm.
The overall dimensions are (122 x 75 x 42 mm) excluding antenna and
connector / cable gland.
!
RRF installation and operating manual
Pag. 7
YES
NO
Do not install the instrument too close to
walls. The ideal distance should be
greater than 35 cm from the antenna.
NO
YES
Keep as much as possible the same antenna orientation, possibly oriented in vertical.
NO
Install the instrument away from metal parts.
