23
DHD-3 Digital Hand Dynamometer – Operation
13. Press the
SAVE
button to save the date and time settings, as well as the
Auto Mode
settings. “SAVE” appears briefl y on the display, and the DHD-3
returns to
Testing Mode
.
14. Press and hold the
PWR
button to power off the DHD-3.
Note:
The
DATE
and
TIME
settings as well as saved test results are retained after
the DHD-3 is powered off. However, if the DHD-3 battery is completely
discharged, saved test results are still retained when re-connected to
a PC for power, but the
DATE
and
TIME
will be set to their initial
values (06.15, 2011, and 12:00). Enter the
DATE
,
TIME
and
Auto Mode
settings then keep the DHD-3 connected to a PC until the battery is fully
recharged.
