28
English
PHOTO SENSOR
YES
PRESELECTION
YES
AUTOMAT. STIRRER
YES
SERIAL NUMBER
001007
CHANGE PASSWORD
** 0 0 0 0 **
☞
☞
PREHEAT. SOLUB.
015
Ex.: To select tea as a multiple dispensing beverage, enter the “
Y E S
Y E S
Y E S
Y E S
Y E S
” menu
and press the tea selection button directly from the front panel.
To exit this mode press the “
CANCEL
” button ref.
5
(Fig.
23
).
NOTE:
Beverages activated for the multiple dispensing mode are
always dispensed without a cup. For information
regarding assembly of key or Saeco Card acceptor to
enable multiple dispensing, contact the Manufacturer or
your nearest representative.
It enables you to activate or disable the photocell inside the cup dispensing
area. During machine use, the photocell detects the presence of a cup in the di-
spensing area. By pressing
ENTER
, the blinking cursor appears. Use the “+”
and “-” buttons to select the desired option, then press
ENTER
again to confirm.
It allows you to display the beverage price by pushing the corresponding
beverage button. The display message then returns to its original message
after a few seconds. During the price display, the green LED corresponding
to the beverage blinks. Beverage price display is activated by selecting
“
Y E S
Y E S
Y E S
Y E S
Y E S
”. By pressing
ENTER
, the blinking cursor appears. Use the “+” and
“-” buttons to select the desired option, then push
ENTER
again to confirm.
It allows you to select the automatic dispensing of stir sticks with all bevera-
ges (by selecting “
Y E S
Y E S
Y E S
Y E S
Y E S
”). By selecting “
N O
N O
N O
N O
N O
”, the stir stick is only dispensed
with beverages pre-programmed with automatic sugar drop. By pressing
ENTER
, the blinking cursor appears. Use the “+” and “-” buttons to select
the desired option, then push
ENTER
again to confirm.
NOTE:
By selecting “
N O
N O
N O
N O
N O
”, the stir stick will not drop when the
user has pre-selected a zero quantity of sugar.
It allows you to program the pre-heating option for the soluble product whipper
bowls. When programmed, this function dispenses a certain quantity of hot wa-
ter into the whipper bowl to pre-heat it prior to the mixing and dispensing of the
soluble product. The timing of this function is controlled by the elapsed time
between the last beverage dispensed using that whipper bowl and the quantity
of the chosen beverage. The whipper bowl is pre-heated (before dispensing the
soluble product) only when a minimum time period has elapsed since the last
dispensing and when the water quantity associated with the soluble product is
under the pre-set limit. The indicated value (programmable from 0 to 25 in in-
crements of 5) represents the water quantity needed for the pre-heating func-
tion. If the value is set to 000, the pre-heating function is not set.
It is the serial number of the machine set by the Manufacturer. It can only
be displayed, not modified.
It allows you to program a password (0000 default value) so that unautho-
rised personnel cannot enter the programming mode. Once programmed,
this password must be entered to access the programming mode. To modify
the password, press
ENTER
. The blinking cursor appears under the first
number on the right. Press one of the buttons from 1 to 10 on the front door
(the same buttons used to select beverages) to set the password. The cursor
moves automatically to the next number. Continue with this process until the
fourth number has been entered. If
CANCEL
is pressed before arriving at
the fourth number, the cursor returns to the previous number and continues
until all numbers are erased.
WARNING: Take note of the new password because
you cannot access the programming without it.