English
68
10
Press the "OK" button to confirm the removal of the
brew group.
1010
INSERT TABLET
Brew Group Clean
OK
Exit
1010
If this option is confirmed,
the
cycle
must
be
completed. Select "EXIT"
to exit.
10
Place the cleaning tablet in the brew group and refit the
group in the machine, making sure that all the components
have been inserted and that the door is closed.
10101010
After placing the tablet in the brew group, press the
"OK" button to confirm.
101010
PUT BACK THE
GROUP
IN THE MACHINE
OK
Exit
101010
Put the brew group back into the machine and press
the "OK" button to confirm.
1010
PLACE A CONTAINER
UNDER THE SPOUT
Coffee
OK
101010
Place a container under the coffee dispensing spout and
press the "OK" button to confirm.
1010
Brew Group Clean
101010
The machine completes the cycle automatically.
10
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back
to
its
normal
operating mode.
10
It
is
recommended
to
remove the group and wash
it under fresh running water.
10
Ensure that the brew group
is completely dry before
putting it back into the
machine.
10
10.2.8 Brew group lubrication
10
Lubricate the brew group after approximately 500 cups
of coffee or once a month. The grease for lubricating
the coffee unit and the relative accessories can be
purchased from your local dealer or the authorised
support centres.
10
To see how many coffees
have been dispensed, see
the "PRODUCTS" menu
in the "STATISTICS" menu
of the tech. menu (see
section
"Description
of
messages
in
the
programming menu").
10
